Using ZBMPlug15 with coordinator without preconfigured key

Questions or discussions on the ZBMPlug15, ZigBee HA 15 Amp Metering Smart Plug

Moderators: Justin, Dhawal

njonty
Posts: 1
Joined: Mon Dec 09, 2013 4:00 pm

Using ZBMPlug15 with coordinator without preconfigured key

Postby njonty » Mon Dec 09, 2013 4:30 pm

Hi,
I am trying to use this plug with a coordinator without preconfigured key. The association process is reset since this ZBMPlug does get the packet with APS security header. So I have two questions
1 So is there a way for the plug to work without security without the preconfigured key ?
2 Is this preconfigured key your own key or default Zigbee key ?

Justin
Moderator
Posts: 146
Joined: Thu Oct 29, 2009 3:34 pm

Re: Using ZBMPlug15 with coordinator without preconfigured k

Postby Justin » Thu Jan 30, 2014 9:55 am

Hello there,

I'm very sorry for missing this post then you wrote it. I'm not sure if you got your questions answered through our support email or phone line, but just in case...the ZBMPlug15 is an HA certified plug and uses the default HA link key to join HA networks. Your network must be using the same key for the device to join.

The default HA key is 5A6967426565416C6C69616E63653039

I hope that helps.


Return to “ZBMPlug15”

Who is online

Users browsing this forum: No registered users and 1 guest