Comments and suggestions on the EZFlora irrigation controller
3 posts • Page 1 of 1
i have 3 EZRain units controlling my sprinklers... recently one of the units (V1 #5010A Rev 1.5) started tripping my GPF breaker ... i noticed that there are 2 heat deformations on the plug-in side of the unit....
FWIW I recently had this same problem though without the heat deformations; in my case the root cause was the transformer that I got from smarthome with my ezrain. I know have a second ezflora and I power both of them with the 'bundled' transfomer from simplehomenet
Who is online
Users browsing this forum: No registered users and 1 guest