I'm trying to make it work with the Toro Wireless Rain Sensor (53770), wired as in the EZFlora Breakout Connector manual, but although the sensor is working (NC dry contact opens up when it senses rain) EZFlora does not stop watering (and actually does not acknowledge anything when the sensor is activated).
To enable the rain sensor I just sent as a Raw Command 0x44 0x0b (as per EZFlora user manual) as both Standard and Extended Message. Bellow what I got with the extended message.
Code: Select all
Sent INSTEON "EZ Flora" raw insteon command (44 0B 00 00 00 00 00 00 00 00 00 00 00 00 00 00; ack: 0B)
Any ideas on what may be wrong?
One possibility, but I found no documentation about it, is the way Indigo works the irrigation schedule is not transferred to the EZFlora module. The software turns on and off each zone according to the schedule, so for EZFlora it is like a manual activation of each zone. Is the rain sensor supposed to work when zones are activated in this way?